[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: updated BCAL geometry specs

Ok Tim, thanks for the heads up.

Cheers, Zisis...

On Feb 4, 2008, at 9:27 AM, Tim Whitlatch wrote:

Hi Zisis,

We are now using 1.25" thick aluminum base plate. This goes toward the outside, so the lead/fiber dimensions are not affected.

Cheers,

       Tim

Zisis Papandreou wrote:
Hi Richard:

as per your request, I have updated the BCAL geometry specs document, leading to version 2:

I have drawn a figure (figure 3 in the current version, which I  drew largely with Google SketchUp) showing the exact dimensions of the readout cells.  Please feel free to insert those into the BCAL specification in the MC.  

(There was some discussion today about revisiting the segmentation for the outer layers, but that will be done at a later date; for now, we are holding to the 6x4 for inner and 2x2 for outer).

Cheers, Zisis...

---
Dr. Zisis Papandreou |  email: zisis@uregina.ca
Department of Physics |  tel. : (306) 585-5379
University of Regina |  tel. : (306) 585-4149
Regina, SK  S4S 0A2 |  fax. : (306) 585-5659



---
Dr. Zisis Papandreou |  email: zisis@uregina.ca
Department of Physics |  tel. : (306) 585-5379
University of Regina |  tel. : (306) 585-4149
Regina, SK  S4S 0A2 |  fax. : (306) 585-5659
World Wide Web:    http://www.phys.uregina.ca/sparro/zisis/