[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: A few questions (fwd)
Hi Elton,
I have included this comment in the captions of the last two
figures. Here is the latest version of the response to question 1.
Regards,
-David
Elton Smith wrote:
> HI Elke,
>
> One note on the rates which we should add, is that the 600 KHz in the FDC
> downstream chambers corresponds to 0.6 deg (this assumes the same dead
> region all through the drift chambers. The rate for 1 degree openning is
> closer to 150 KHz maximum or a 5% aperture.
>
> This might be a number whis is useful to quote in answering the first
> question.
>
> Cheers, Elton.
>
>
>
>
> Elton Smith
> Jefferson Lab MS 12H5
> 12000 Jefferson Ave
> Suite # 16
> Newport News, VA 23606
> elton@jlab.org
> (757) 269-7625
>
> On Wed, 7 Mar 2007, Elke-Caroline Aschenauer wrote:
>
>
>> Dear all,
>>
>> we have to find answers to this questions I suggest we discuss them in the
>> coffee break.
>> Dan I print you document on the costing of the fdc to give it to them,
>> that should answer definetely all on it for the fdc, Curtis can we give
>> them what you gave in former times and lately to elton to be included in
>> the costbook.
>>
>> For the rest I guess it should be not very difficult to find answers.
>>
>> Regards
>> elke
>>
>>
>>
>> ( `,_' )+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=
>> ) `\ -
>> / '. | +
>> | `, Elke-Caroline Aschenauer =
>> \,_ `-/ -
>> ,&&&&&V Jefferson Lab +
>> ,&&&&&&&&: HALL-D 12C / F381 121-A Atlantic Avenue =
>> ,&&&&&&&&&&; Mailstop: 12H5 Hampton, VA 23664 -
>> | |&&&&&&&;\ 12000 Jefferson Ave +
>> | | :_) _ Newport News, VA 23606 Tel.: 001-757-224-1216 =
>> | | ;--' | Mail: elke@jlab.org Mobil: 001-757-256-5224 -
>> '--' `-.--. | +
>> \_ | |---' Tel.: 001-757-269-5352 =
>> `-._\__/ Fax.: 001-757-269-6248 -
>> +=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+
>>
>> ---------- Forwarded message ----------
>> Date: Wed, 07 Mar 2007 08:02:21 -0600
>> From: David Christian <dcc@fnal.gov>
>> To: elke@jlab.org
>> Cc: David Christian <dcc@fnal.gov>, brooksw@jlab.org, whitlock@jlab.org
>> Subject: A few questions
>>
>> Dear Elke,
>>
>> After yesterday's session, we have a few questions the answers to which
>> would help us as we consider what to write in a report. I would
>> appreciate it if you could respond today:
>>
>> 1) What calculation/simulation has been done of the background processes
>> that will dominate the rate in the chambers?
>>
>> 2) It appears that the minimum allowable straw radius is set by a
>> maximum allowable rate that is calculated assuming that a dE/dx
>> measurement needs to be made in these straws. Is this correct? If not,
>> how was the maximum allowable rate estimated?
>>
>> 3) Do you have supporting material available for the cost estimates?
>>
>> 4) Since the configuration of magnet steel is being changed, we are
>> somewhat concerned with the fact that you do not plan to map the field.
>> What drove this decision?
>>
>> Sincerely,
>> David Christian
>>
>>
>>
>>
>
>
--
------------------------------------------------------------------------
David Lawrence Ph.D.
Staff Scientist Office: (757)269-5567 [[[ [ [ [
Jefferson Lab Pager: (757)584-5567 [ [ [ [ [ [
http://www.jlab.org/~davidl davidl@jlab.org [[[ [[ [[ [[[
------------------------------------------------------------------------
DCReviewReply.pdf