Re: FDC meeting

[Roger Flood <flood@jlab.org>]

FDC cathode - Further researched flex-rigid PCB fabrication.  Discussed 
with Chuck H. mechanical issues regarding the cathode "daughter boards".

Daniel S. Carman wrote:
> Folks,
>
> Due to the Hall D collaboration meeting that begins today, we will
> not have our usual weekly FDC meeting.  I would appreciate if folks
> working on various design projects (listed below) send around a short
> update of where they are.
>
> Kim: STB and HVTB layout
> Roger: Cathode connections to daughter board
> Bill: Cooling system design
> Brian: Stress test work, construction of wire frames, contact with FNAL
> Tim: Finalizing O.D. of chamber frames (1200 mm or 1178 mm)
> Simon: B-field test and Lorentz effect tracking algorithm
>
> From my end, I have started negotiations with IUCF about handling the
> wire winding for the FDCs.  They are now working to prepare a detailed
> budget and possible time line for the different phases of the winding.
> Let me know if you have any questions.
>
>
> 				Regards,
>
> 				   Daniel
>
> **********************************************************************
> *                                                                    *
> * Dr. Daniel S. Carman                   e-mail : carman@jlab.org    *  
> * Staff Scientist                        office : (757)-269-5586     *
> * Jefferson Laboratory                   web: www.jlab.org/~carman   *  
> *                                                                    *
> **********************************************************************
>
>
>
>
>