[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Cathode vibration- how to dampen?
Hi Daniel,
There have been some studies done int the test lab on vibration sources.
I will dig them up.
Cheers,
Tim
Daniel S. Carman wrote:
> Elke,
>
> I understand from recent conversations that Tim has a list of
> vibration sources in the Hall. We will look to calculate the
> natural frequency of vibration of the cathodes and then perhaps
> devise a simple measurement to verify. I will keep you informed
> on what we learn.
>
>
> Regards,
>
> Daniel
>
>
> **********************************************************************
> * *
> * Dr. Daniel S. Carman e-mail : carman@jlab.org *
> * Staff Scientist office : (757)-269-5586 *
> * Jefferson Laboratory web: www.jlab.org/~carman *
> * *
> **********************************************************************
>
>
>
> On Fri, 22 Feb 2008, Elke-Caroline Aschenauer wrote:
>
>
>> On Wed, 20 Feb 2008, Tim Whitlatch wrote:
>>
>> Dear all,
>>
>> one other thing to investigate before doing a lot work is what is in the
>> environment of the fdc which could cause vibrations, like pumps.
>>
>> Cheers elke
>>
>>
>>
>>
>>> Date: Wed, 20 Feb 2008 14:22:39 -0500
>>> From: Tim Whitlatch <whitey@jlab.org>
>>> To: wcrahen <wcrahen@jlab.org>, halld-tracking-hw@jlab.org
>>> Subject: Re: Cathode vibration- how to dampen?
>>>
>>> Thanks for the heads up Bill. This may or may not be an issue. Dan has
>>> proposed doing a simple test to determine what frequencies drive the
>>> oscillations (visible) in the cathode plane. He said the equipment is
>>> available. Before we spend any time on coming up with solutions, let's
>>> see what the natural frequencies of the plane are and what driving
>>> frequencies it will be subject to by way of Dan's simple test. There may
>>> be no issue at all.
>>>
>>> Cheers,
>>>
>>> Tim
>>>
>>> wcrahen wrote:
>>>
>>>> Brian stopped by to discuss vibration of the cathode planes in the
>>>> FDC- and any strategies we might have to eliminate motion. He would
>>>> like to set up a meeting. The first thought is to attach the cathode
>>>> to the ground plane with some rohacel plugs (we can't have a complete
>>>> ring if we flow gas through the center).
>>>>
>>>
>> ( `,_' )+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=
>> ) `\ -
>> / '. | +
>> | `, Elke-Caroline Aschenauer =
>> \,_ `-/ -
>> ,&&&&&V Jefferson Lab +
>> ,&&&&&&&&: HALL-D 12C / F381 121-A Atlantic Avenue =
>> ,&&&&&&&&&&; Suite 8 Hampton, VA 23664 -
>> | |&&&&&&&;\ 12000 Jefferson Ave +
>> | | :_) _ Newport News, VA 23606 Tel.: 001-757-224-1216 =
>> | | ;--' | Mail: elke@jlab.org Mobil: 001-757-256-5224 -
>> '--' `-.--. | +
>> \_ | |---' Tel.: 001-757-269-5352 =
>> `-._\__/ Fax.: 001-757-269-6331 -
>> +=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+
>>
>>
--
ÐÏࡱá
begin:vcard
fn:Timothy Whitlatch, PE
n:Whitlatch;Timothy
tel;work:757-269-5087
tel;fax:757-269-5279
version:2.1
end:vcard