[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: strip width for 75 deg small-scale prototype cathode boards
Folks,
The layout of the nominal cathode design for the full-scale
prototype is pitch 4 mm gap 1 mm. Some of the older cathodes
including the dummy cathodes had 5 mm pitch with 1 mm gap. The
design has changed a couple of times along the way obviously.
Regards,
Daniel
**********************************************************************
* *
* Dr. Daniel S. Carman e-mail : carman@jlab.org *
* Staff Scientist office : (757)-269-5586 *
* Jefferson Laboratory web: www.jlab.org/~carman *
* *
**********************************************************************