[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: strip width for 75 deg small-scale prototype cathode boards
Hi Dan,
The present design has 4 mm strip and 1 mm gap. The pitch is 5 mm.
Regards,
Fernando
Daniel S. Carman wrote:
> Folks,
>
> The layout of the nominal cathode design for the full-scale
> prototype is pitch 4 mm gap 1 mm. Some of the older cathodes
> including the dummy cathodes had 5 mm pitch with 1 mm gap. The
> design has changed a couple of times along the way obviously.
>
>
> Regards,
>
> Daniel
>
>
> **********************************************************************
> * *
> * Dr. Daniel S. Carman e-mail : carman@jlab.org *
> * Staff Scientist office : (757)-269-5586 *
> * Jefferson Laboratory web: www.jlab.org/~carman *
> * *
> **********************************************************************
>
>
>
>
begin:vcard
fn:Fernando J. Barbosa
n:Barbosa;Fernando J.
org:Jefferson Lab
adr:Suite #10, 12B3;;12000 Jefferson Ave.;Newport News;VA;23606;USA
tel;work:757-269-7433
version:2.1
end:vcard