[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: EDAC - cable connection
Hi Yves,
That's good.
Regards,
Fernando
Yves Van Haarlem wrote:
> Hi Fernando,
>
> Thanks for the feed back.
>
>> It looks good. However, I suggest you add another ground cable
>> (black?) and perhaps connect both ground cables to a single crimp
>> eyelet.
> Both ground leads are connected together but that is not visible on
> the picture. Do you mean two cables that connect to the end plate?
>
>
>> For reliability, I would also connect another HV shield wire (red?).
>> Maybe these are already there but I cannot see from the picture.
> Also here the two HV leads are connected together but that is not
> visible on the picture.
>
>
>> A small detail. Do you plan to apply any conformal coating (acrylic)
>> over the the shield solder joints? This is just to prevent any shield
>> wires from contacting any other object and to keep them secure.
>> Please avoid any silicone based wires or products that go on the gas
>> volume.
> We start doing that after taking the picture and we indeed do not want
> any silicon based products. We use Scotch Weld DP-270 (black) to do this.
>
> Cheers,
> Yves
>
>
>>
>> Regards,
>> Fernando
>>
>> Yves Van Haarlem wrote:
>>> Hi All,
>>>
>>> On
>>>
>>> http://www.jlab.org/Hall-D/software/wiki/index.php/Image:Edacconn.jpg
>>>
>>> you can see how Gary prepared the connector and the cables in order
>>> to be inserted and hooked up with the wires. We used RG-188A/U
>>> cables which have teflon and are much more heat resistant (good for
>>> soldering). The whole assambly is pretty stiff and rigid. We'll have
>>> to see hpw difficult it is to connect it to the wires.
>>>
>>> Cheers,
>>> Yves
>>>
>>> /--------------------------------
>>> / Yves Van Haarlem
>>> _--~~--_ /
>>> /~/_| |_\~\ / Carnegie Mellon University
>>> |____________| / Department of Physics
>>> |[][][][][][]|:= / Wean Hall room 8404
>>> __| __ |__ \ Pittsburgh, PA 15213
>>> | ||. | == | | \ USA
>>> (| ||__| == | |) \
>>> | |[] [] == | | \ Tel.: +1 412 268-6949
>>> | |____________| | \ +1 412 641-9252
>>> /__\ /__\ \ Fax.: +1 412 681-0648
>>> ~~ ~~ \-----------------------------------
>>
begin:vcard
fn:Fernando J. Barbosa
n:Barbosa;Fernando J.
org:Jefferson Lab
adr:Suite #10, 12B3;;12000 Jefferson Ave.;Newport News;VA;23606;USA
tel;work:757-269-7433
version:2.1
end:vcard