Next FDC group meeting

["Daniel S. Carman" <carman@jlab.org>]

Folks,

The next FDC group meeting is scheduled for tomorrow in F326 at
1:30 p.m.. The agenda is given below.

NOTE: Bill, Mark, and Brian should give cathode R&D schedule
updates to Chuck before the end of the day today.


 				Regards,

 					Daniel

**********************************************************************
FDC Weekly Meeting Agenda
June 4, 2009
-----------------------------
1. Full-scale prototype preparations
     - procurements/preparations for construction
        - pins for construction jig
        - o-ring material order
     - fixture for support/rotation of full-scale prototype
2. Wire frame update
     - update from IUCF
        - close out meeting
        - Phase 3 planning
     - update of construction document
        - wire electroplating procedures
     - Phase 2 component soldering status
        - solder station + stencils
        - HV pigtails
        - frame cleaning
        - frame storage
3. Cathode frame update
     - R&D schedule review
     - cathode construction document
     - cathode frames
        - lamination schedule
     - measuring 5 um cathode flatness
        - better cathode frame clamping scheme
     - cathode board electrical QA status
     - cathode construction updates
        - electrical QA status
        - edge cutting status
        - board layup status
          - review of "final" layup techniques
        - update on tension settings for 5 um and 2 um boards
        - do we plan to make up all single board before sandwich
          construction?
     - cathode board inventory
        - 3 new 2 um sets in order
        - 1 new 5 um set in order
        - 1 old 5 um board on flatness system
        - 1 old 2 um board in tensioner
        - 1 old 2 um board to be laid up
     - cathode board order
        - post-mortem on problems with order
     - rigid flex assembly order update
        - delivery status
        - component soldering on rigid-flex assemblies
     - purchase of 2 micron board material for production
     - document for QA/soldering/cleaning cathodes
     - document for QA/stuffing/cleaning cathode daughter boards
4. Miscellaneous
     - LV, HV, signal cable update
     - cooling system test report
     - HV connections to packages
     - sense and field wire testing
        - mass spectroscopy
        - QA test document
     - remaining FDC system design work
     - FDC construction clean room location update
5. Prototype tests
     - small-scale prototype resolution study update
     - update on cosmic ray stand
     - test plan for full-scale prototype
     - plans for beam test??
**********************************************************************
**********************************************************************
*                                                                    *
* Dr. Daniel S. Carman                   e-mail : carman@jlab.org    *
* Staff Scientist                        office : (757)-269-5586     *
* Jefferson Laboratory                   web: www.jlab.org/~carman   *
*                                                                    *
**********************************************************************