[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
control.in cards
Dear Colleagues,
I followed up discussion during the software
meeting yesterday, and implemented two cards
in the control.in file:
c Use this card to enable/disable ( SAVEHITS 1/0 ) writing
c events with no hits in the detector to the hddm output file.
c Default value is 0.
SAVEHITS 0
c This card is used to enable/disable ( SHOWERS_IN_COL 1/0 )
c simulation of showers in the primary and secondary collimators
c placed in the collimator cave. The default value is set to 0.
SHOWERS_IN_COL 0
Cheers,
Sascha