Re: Tagger height

[Tim Whitlatch <whitey@jlab.org>]

The same holds true for the quadrapole.....

Tim

Tim Whitlatch wrote:
> Folks,
>
> As Chuck continued on the tagger interface drawing, another 
> discrepancy was found. Both the 3D model from Franz and the IHEP 
> drawings show the beam height to be 82.2 inches from the Tagger area 
> floor. The civil drawings show 71" (1.8M). The 1.8M agrees with Jim 
> Kellie's comment from 2006 and our current specification. We will 
> update our 3D model by shortening the Tagger stand to put it 71" off 
> the floor to beamline.
> I just want to make sure this point gets across to whomever wins the 
> contract. The interface drawing takes precedence over the IHEP drawings.
>
> Cheers,
>
>       Tim
>