[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Sweep magnets
Hi Richard,
Yes, I meant 1/2 kG. These magnets have about a 6cm gap. This can be
reduced to increase the field.These are from the original FEL IR demo.
Anyway, I was just pointing out that we may have something around here.
Tim
Richard Jones wrote:
> Tim,
>
> The gap height of the first magnet is 2 cm and of the second is 5 cm
> in the simulation. These are chosen without any specific cost
> optimization, just to insure that the background from scraping was
> really negligible. There is nothing written in stone. After recent
> discussions with Alexander Somov, I am now concerned that the field
> integral of 1 kG-m that we have been using might be lower than
> optimal. This should be looked at before we finalize this spec. Just
> to check, did you really mean 1/2 kG, or 1/2 Tesla?
>
> Richard Jones
>
>
> Tim Whitlatch wrote:
>> In speaking with Tom Hiatt and George Biallas at JLAB, there may be
>> some dipole magnets available for us in the range of 1/2 kGauss and
>> .8 meters long. Do we have an idea of the rest of the requirements
>> for this magnet?
>>
>> Thanks,
>>
>> Tim
>
begin:vcard
fn:Timothy Whitlatch, PE
n:Whitlatch;Timothy
tel;work:757-269-5087
tel;fax:757-269-5279
version:2.1
end:vcard