[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Cable length [was: Contact Information for Electronics]
Hi Tim,
That's exactly what I was asking for. Somehow, I never got this table.
Thanks so much,
Fernando
Tim Whitlatch wrote:
> I have attached a table we made last year showing the cable lengths.
> These are based on already installed configuration. Joe has added 7'
> to the numbers. This is good since there will be additional length
> needed for installing the FDC and CDC. This of course should be
> revisited for the final assy.
>
> Cheers,
> Tim
>
> Joe Beaufait wrote:
>> The longest run calculation done on autocad showed 52 ft, I made the
>> test cables 59' or 18 meters. the 3m connectors are difficult and I
>> would suggest sending assemblies out for construction.
>> the cables I delivered today are not guaranteed.
>>
>>
>> Gerard Visser wrote:
>>> Hi Fernando,
>>> I'm not sure if you're asking about this - but I don't believe
>>> there is any hard constraint from the electronics design that we are
>>> approaching yet with 21 m cable lengths. I have a (hastily designed)
>>> equalization circuit working with a 21 m cable and it has about 11.7
>>> bits of dynamic range and ~7 ns risetime, it should be enough. I
>>> don't think we could have 100 m cable, but I think anything less
>>> than 25 m is certainly reasonable.
>>> To design and test, though, I believe we want to get to more
>>> specific planning of the lengths now (or as soon as practical). That
>>> was my main point.
>>>
>>> Gerard
>>>
>>> Fernando J. Barbosa wrote:
>>>> Hi Gerard,
>>>>
>>>> Yes, we really need to have a table like the one you suggest.
>>>> It is
>>>> especially important to know the maximum lengths given the constraints
>>>> on shaping, gain and dynamic range for both the fADC-125 and the ASIC.
>>>>
>>>> Regards,
>>>> Fernando
>>
>>
>>
begin:vcard
fn:Fernando J. Barbosa
n:Barbosa;Fernando J.
org:Jefferson Lab
adr:Suite #10, 12B3;;12000 Jefferson Ave.;Newport News;VA;23606;USA
tel;work:757-269-7433
version:2.1
end:vcard