[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Collimator layout
Thanks Richard. I will discuss the target vacuum with Mike Seely. This
would need an entrance window also.
Tim
Richard Jones wrote:
> Tim Whitlatch wrote:
>> Ok Richard, I believe we have incorporated your comments. The linked
>> revisions can be used as a baseline if it is correct. You mentioned
>> three mylar windows. Are you including the target window in the three?
> There is the exit window from the long 12" beam pipe between the
> tagger hall and where it ends upstream of the primary collimator.
> Then there is the entrance window where we go back into vacuum just
> after the secondary collimator. Finally there is the exit window
> where we go back briefly to atmosphere before we enter the GlueX
> target. One might argue that the vacuum pipe coming out from the
> collimator cave might couple directly into the target vacuum, but I
> don't want to complicate the design of the target. If I were in
> charge of the target, I would want my vacuum system to be self-contained.
>> We can then start looking at locating the pair spectrometer. Can the
>> secondary collimator be moved upstream at all?
> Yes, the order and total material in the shielding plan is important,
> but not their spacing.
>
> -Richard J.
>
begin:vcard
fn:Timothy Whitlatch, PE
n:Whitlatch;Timothy
tel;work:757-269-5087
tel;fax:757-269-5279
version:2.1
end:vcard