halld-electronics
archive_headers
Parent Category
Archives
Computer
Center
Jefferson
Lab
- 12GeV Trigger Workshop---a message from Chris Cuevas (fwd)
- From: Elton Smith <elton@jlab.org>
- Trigger Meeting Minutes
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: EPICS Oscilloscope demo - Tuesday 3/24 CC L104 10am
- From: Elliott Wolin <wolin@jlab.org>
- New room for ZTEC EPICS Oscilloscope demo - Tuesday 3/24 CC L10410am
- From: Elliott Wolin <wolin@jlab.org>
- EPICS Oscilloscope demo - Tuesday 3/24 CC L207
- From: Elliott Wolin <wolin@jlab.org>
- [Fwd: EPICS Oscilloscope Demo at JLab]
- From: Elliott Wolin <wolin@jlab.org>
- Bi-weekly call
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- Re: Updated Spreadsheet
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- Updated Spreadsheet
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- Where is shemp.jlab.org?
- From: Elliott Wolin <wolin@jlab.org>
- X-ray curiosity
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: TDC Presentation
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Gluex doc 1131: response function
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Re: Gluex doc 1131: response function
- From: Gerard Visser <gvisser@indiana.edu>
- Re: Gluex doc 1131: response function
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Gluex doc 1131: response function
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Charge division
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Gluex doc 1131: response function
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- TDC Presentation
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Hall D Online meeting time
- From: Elliott Wolin <wolin@jlab.org>
- Re: CDC connector
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: SD module
- From: "C. Cuevas" <cuevas@jlab.org>
- Re: Documents and meetings
- From: Elliott Wolin <wolin@jlab.org>
- Re: Documents and meetings
- From: Chris Cuevas <cuevas@jlab.org>
- Documents and meetings
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Some reports on Hamamatsu MPPC's
- From: Elliott Wolin <wolin@jlab.org>
- Re: ADC125, signal dist module, 2eSST tests
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: ADC125, signal dist module, 2eSST tests
- From: Gerard Visser <gvisser@indiana.edu>
- Re: ADC125, signal dist module, 2eSST tests
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: ADC125, signal dist module, 2eSST tests
- From: Gerard Visser <gvisser@indiana.edu>
- fADC250 at IU (fwd from Mihahlo)
- From: Elton Smith <elton@jlab.org>
- Re: fADC250 at IU (fwd from Dave Abbott)
- From: Elton Smith <elton@jlab.org>
- HV plateau
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Suggestion for routing the Bcal and Fcal cables
- From: Alexander Somov <somov@jlab.org>
- Re: Suggestion for routing the Bcal and Fcal cables
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Suggestion for routing the Bcal and Fcal cables
- From: Tim Whitlatch <whitey@jlab.org>
- Re: Suggestion for routing the Bcal and Fcal cables
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Suggestion for routing the Bcal and Fcal cables
- From: Elton Smith <elton@jlab.org>
- Congratulations! (fwd)
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: homework
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- homework
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- show and tell
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- info
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Presentation slides
- From: Alexander Somov <somov@jlab.org>
- Re: prebrief material and update on dry runs
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Document updates
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- prebrief material and update on dry runs
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Fwd: Overview Document
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- prebrief material and update on dry runs this week
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Documentation
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- update on dry runs this week
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- trigger simulation document
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Your Note
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- Comments
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- Re: pre-brief material and dry runs
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: VXS SD Module
- From: "C. Cuevas" <cuevas@jlab.org>
- dry runs this week
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- VXS SD Module
- From: Gerard Visser <gvisser@indiana.edu>
- Re: some small suggestions to the electronics wiki page
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- some small suggestions to the electronics wiki page
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- pre-brief material and dry runs
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Dry runs for Hall D May 2008 Subsystem Review
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: dry runs
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- dry runs
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: timelines for the review
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- First level trigger outline
- From: Alexander Somov <somov@jlab.org>
- dave's trigger level 1 document
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Preamp & Interposer
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Preamp & Interposer
- From: Gerard Visser <gvisser@indiana.edu>
- Re: Preamp & Interposer
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- VME/VXS P0 pinout JLab Standard
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Preamp & Interposer
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Preamp & Interposer
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Pre-brief outlines for Hall D May 2008 Subsystem Review
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Pre-brief outlines for Hall D May 2008 Subsystem Review
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Pre-brief outlines for Hall D May 2008 Subsystem Review
- From: Elliott Wolin <wolin@jlab.org>
- FLT review outline
- From: Alexander Somov <somov@jlab.org>
- Re: timelines for the review
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Interposer
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Interposer
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Interposer
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Interposer
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- fADC timing -- solution found
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- outline of monitoring issues for review
- From: "Mark M. Ito" <marki@jlab.org>
- Re: fADC stop pointer
- From: "Mark M. Ito" <marki@jlab.org>
- Re: Improved Spectra-Strip Cable -- TPO insulation
- From: Elton Smith <elton@jlab.org>
- Re: Cable
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Cable
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- timelines for the review
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- some helpful info
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- date for system review
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- fADC stop pointer
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Improved Spectra-Strip Cable -- TPO insulation
- From: Gerard Visser <gvisser@indiana.edu>
- Re: Accomodating I2C and CAN in Hall D control system
- From: Elliott Wolin <wolin@jlab.org>
- Further clarification on Hall D controls stragegy
- From: Elliott Wolin <wolin@jlab.org>
- Re: Accomodating I2C and CAN in Hall D control system
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Accomodating I2C and CAN in Hall D control system
- From: Gerard Visser <gvisser@indiana.edu>
- Tracking & PID Review - Electronics
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Conference call - FDC & CDC Tests with Preamps
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Charge range on tracking chambers
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Charge range on tracking chambers
- From: "Mark M. Ito" <marki@jlab.org>
- Corrected Notes from the Hall D Trigger 'Workshop' 11March08
- From: "C. Cuevas" <cuevas@jlab.org>
- Improved Spectra-Strip Cable -- TPO insulation
- From: Gerard Visser <gvisser@indiana.edu>
- Hall D monitoring and controls strategy/philosophy
- From: Elliott Wolin <wolin@jlab.org>
- Re: Accomodating I2C and CAN in Hall D control system
- From: "C. Cuevas" <cuevas@jlab.org>
- Re: Accomodating I2C and CAN in Hall D control system
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Accomodating I2C and CAN in Hall D control system
- From: Gerard Visser <gvisser@indiana.edu>
- Re: Accomodating I2C and CAN in Hall D control system
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Accomodating I2C and CAN in Hall D control system
- From: Gerard Visser <gvisser@indiana.edu>
- Re: Accomodating I2C and CAN in Hall D control system
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Accomodating I2C and CAN in Hall D control system
- From: Elliott Wolin <wolin@jlab.org>
- Re: Charge range on tracking chambers
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Charge range on tracking chambers
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Charge range on tracking chambers
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: NIM Clock/Fanout Board
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Charge range on tracking chambers
- From: Gerard Visser <gvisser@indiana.edu>
- Re: Charge range on tracking chambers
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- Re: Charge range on tracking chambers
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Charge range on tracking chambers
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- Re: Charge range on tracking chambers
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- receiver/shaper board conversion for use with GAS-1 & 18m cable
- From: Gerard Visser <gvisser@indiana.edu>
- Charge range on tracking chambers
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Cable Carrier Systems
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Tracking Detector Tests & Status
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: VXS & Signal Distribution (fwd from Ben Raydo)
- From: Elton Smith <elton@jlab.org>
- Re: VXS & Signal Distribution
- From: Gerard Visser <gvisser@indiana.edu>
- Re: VXS & Signal Distribution
- From: "C. Cuevas" <cuevas@jlab.org>
- Re: VXS & Signal Distribution
- From: Gerard Visser <gvisser@indiana.edu>
- Re: VXS & Signal Distribution
- From: Chris Cuevas <cuevas@jlab.org>
- Re: VXS & Signal Distribution
- From: Gerard Visser <gvisser@indiana.edu>
- Re: question on offset DAC's for the ADC125
- From: "Mark M. Ito" <marki@jlab.org>
- Re: question on offset DAC's for the ADC125
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- question on offset DAC's for the ADC125
- From: Gerard Visser <gvisser@indiana.edu>
- Re: VXS & Signal Distribution
- From: Gerard Visser <gvisser@indiana.edu>
- VXS & Signal Distribution
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: P0 connector, busy questions
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: P0 connector, busy questions
- From: Gerard Visser <gvisser@indiana.edu>
- Re: P0 connector, busy questions
- From: Chris Cuevas <cuevas@jlab.org>
- Re: P0 connector, busy questions
- From: Gerard Visser <gvisser@indiana.edu>
- Re: P0 connector, busy questions
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Hall D Electronics System Review - 14 March 2008, F326/327, 2:00p.m.
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Hall D Electronics System Review - 14 March 2008, F326/327, 2:00p.m.
- From: "C. Cuevas" <cuevas@jlab.org>
- Re: Hall D Electronics System Review - 14 March 2008, F326/327, 2:00p.m.
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Hall D Electronics System Review - 14 March 2008, F326/327, 2:00p.m.
- From: Chris Cuevas <cuevas@jlab.org>
- Hall D Electronics System Review - 14 March 2008, F326/327, 2:00p.m.
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: P0 connector, busy questions
- From: Gerard Visser <gvisser@indiana.edu>
- Re: P0 connector, busy questions
- From: Chris Cuevas <cuevas@jlab.org>
- LV & HV distribution documents updated
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- P0 connector, busy questions
- From: Gerard Visser <gvisser@indiana.edu>
- Re: Cable specs
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Fadc125 Status & Shaper Mods
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Cable specs
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Tagger Fixed Array & Pair Spectrometer Electronics Update
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Tagger Fixed Array & Pair Spectrometer Electronics Update (fwd)
- From: Elton Smith <elton@jlab.org>
- Hall D Electronics System Review - meeting summary
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Tagger Fixed Array & Pair Spectrometer Electronics Update
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Start Counter Electronics Update
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Minutes of the Conference Call of 13 Feb
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Shaper Boards
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Shaper Boards
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Shaper Boards
- From: Gerard Visser <gvisser@indiana.edu>
- Shaper Boards
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- Re: FYI + Shaper board
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: FYI
- From: Gerard Visser <gvisser@indiana.edu>
- FYI
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- noise measurements with the GAS-1
- From: Gerard Visser <gvisser@indiana.edu>
- CDC HVB v3
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Cable + shaper board
- From: Gerard Visser <gvisser@indiana.edu>
- Cable + shaper board
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Struck ADC test clock source
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Struck ADC test clock source
- From: Gerard Visser <gvisser@indiana.edu>
- Re: Struck ADC test clock source
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Struck ADC test clock source
- From: Gerard Visser <gvisser@indiana.edu>
- EDAC connector
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: clock oscillators & cable issue (fwd)
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- HVB design v2
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- More noise studies
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- News on CDC: shielding
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Shaper channel 3: OK again
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Shaper channel 3
- From: Gerard Visser <gvisser@indiana.edu>
- Shaper channel 3
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: oscillations
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: oscillations
- From: Gerard Visser <gvisser@indiana.edu>
- Re: oscillations
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: oscillations
- From: Gerard Visser <gvisser@indiana.edu>
- Re: TMP421 on the preamp board
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- TMP421 on the preamp board
- From: Gerard Visser <gvisser@indiana.edu>
- Re: News on CDC noise
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- News on CDC noise
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: News on the preAmp + CDC
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: News on the preAmp + CDC
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: News on the preAmp + CDC
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- RE: News on the preAmp + CDC
- From: "Visser, Gerard" <gvisser@indiana.edu>
- Re: News on the preAmp + CDC
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: News on the preAmp + CDC
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- Re: News on the preAmp + CDC
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- News on the preAmp + CDC
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Electroics Forum 9 January 2008
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Electroics Forum 9 January 2008
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: some more test results with the new preamp
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- some more test results with the new preamp
- From: Gerard Visser <gvisser@indiana.edu>
- Re: New Preamp Tests
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: New Preamp Tests
- From: Gerard Visser <gvisser@indiana.edu>
- Re: New Preamp Tests
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: New Preamp Tests
- From: Gerard Visser <gvisser@indiana.edu>
- New Preamp Tests
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Preamp tests
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Qualification Checklist for Electronics
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: GlueX-doc
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- GlueX-doc
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- RE: Preamp tests
- From: "Visser, Gerard" <gvisser@indiana.edu>
- Re: Preamp tests
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Preamp tests
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Preamp tests
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Preamp tests
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Re: Preamp tests
- From: Gerard Visser <gvisser@indiana.edu>
- Re: Preamp tests
- From: "Curtis A. Meyer" <cmeyer@ernest.phys.cmu.edu>
- Re: Preamp tests
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Preamp tests
- From: Gerard Visser <gvisser@indiana.edu>
- Re: Preamp tests
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Preamp tests
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Preamp tests
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Visit to CMU
- From: Gerard Visser <gvisser@indiana.edu>
- Visit to CMU
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Preamp tests
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Oscillations
- From: Yves Van Haarlem <yvhaarle@ernest.phys.cmu.edu>
- Re: Short on the preAmp card (fwd Yves)
- From: Elton Smith <elton@jlab.org>
- Re: Short on the preAmp card (fwd from Yves)
- From: Elton Smith <elton@jlab.org>
- Re: Short on the preAmp card (fwd from Yves)
- From: Elton Smith <elton@jlab.org>
- Re: Short on the preAmp card
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Short on the preAmp card
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Short on the preAmp card
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- FDC HV Distribution
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Electronics at IU
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Electronics at IU
- From: Paul Smith <ptsmith@indiana.edu>
- Re: Electronics at IU
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Preamp cards shipped
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Shaping time Setting
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Shaping time Setting (fwd)
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- RE: Shaping time Setting (fwd)
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Contact Information for Electronics
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Contact Information for Electronics
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- meeting to discuss action items for cd-3
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Agenda for Hall D Electronics Forum (fwd)
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Wiener Presentation next week
- From: "C. Cuevas" <cuevas@jlab.org>
- Re: robot for circuit boards
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Re: robot for circuit boards
- From: Alex Dzierba <dzierba@indiana.edu>
- Re: robot for circuit boards
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: robot for circuit boards
- From: Alex Dzierba <dzierba@indiana.edu>
- Re: robot for circuit boards
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: robot for circuit boards
- From: Paul Smith <ptsmith@indiana.edu>
- Re: robot for circuit boards
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Hall D Electronics Forum - 24 October 2007
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: [GlueX] Hall D Electronics Forum - 24 October 2007 (fwd from DAbbott)
- From: Elton Smith <elton@jlab.org>
- Re: Hall D Electronics Forum - 24 October 2007
- From: Richard Jones <richard.t.jones@uconn.edu>
- Progress on the Prototype board.
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Hall D Electronics Forum - 24 October 2007
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: VME64x Pinout for F1TDC, fADC125, fADC250
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: VME64x Pinout for F1TDC, fADC125, fADC250
- From: Gerard Visser <gvisser@indiana.edu>
- Re: VME64x Pinout for F1TDC, fADC125, fADC250
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: VME64x Pinout for F1TDC, fADC125, fADC250
- From: "C. Cuevas" <cuevas@jlab.org>
- ADC125 data format, 2nd try --- and FDC hit limit
- From: Gerard Visser <gvisser@indiana.edu>
- ADC125 spec doc
- From: Gerard Visser <gvisser@indiana.edu>
- ADC125 P2 pinout
- From: Gerard Visser <gvisser@indiana.edu>
- Re: Trigger bits for Hall D front-end boards
- From: Gerard Visser <gvisser@indiana.edu>
- Electronics Documentation
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: TDC board discussion (fwd from Gerard)
- From: Elton Smith <elton@jlab.org>
- TDC board discussion
- From: Elton Smith <elton@jlab.org>
- First Report on Measurements of the GAS - 1 ASIC
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Re: Flash ADC Status - Front-end Test Results
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- wiki page on design for SiPM base boards
- From: Richard Jones <richard.t.jones@uconn.edu>
- Re: GAS-1 ASIC: very reasonable first results!
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- GAS-1 ASIC: very reasonable first results!
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Re: Flash ADC Status - Front-end Test Results (fwd from Dave Mack)
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: GAS-1 ASICS arrived at Penn
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- GAS-1 ASICS arrived at Penn
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Re: Flash ADC Status - Front-end Test Results (fwd from Dave Mack)
- From: Elton Smith <elton@jlab.org>
- Re: DRAFT specifications for DC flash
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- DRAFT specifications for DC flash
- From: Elton Smith <elton@jlab.org>
- Re: FDC cableing
- From: Joe Beaufait <beaufait@jlab.org>
- Re: FDC cableing
- From: Joe Beaufait <beaufait@jlab.org>
- Re: FDC cableing
- From: Gerard Visser <gvisser@indiana.edu>
- Re: FDC cableing
- From: Joe Beaufait <beaufait@jlab.org>
- Re: FDC daughter board questions
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: FDC cableing
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: FDC cableing
- From: Gerard Visser <gvisser@indiana.edu>
- Re: FDC cableing
- From: Elton Smith <elton@jlab.org>
- Re: FDC cableing
- From: Joe Beaufait <beaufait@jlab.org>
- Re: FDC cableing
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- FDC daughter board questions
- From: "John Schaapman" <jsch@phys.ualberta.ca>
- Re: robot for circuit boards
- From: Paul Smith <ptsmith@indiana.edu>
- Re: robot for circuit boards
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: robot for circuit boards
- From: Paul Smith <ptsmith@indiana.edu>
- Re: robot for circuit boards
- From: Alex Dzierba <dzierba@indiana.edu>
- Re: robot for circuit boards
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: robot for circuit boards
- From: Alex Dzierba <dzierba@indiana.edu>
- Re: robot for circuit boards
- From: "C. Cuevas" <cuevas@jlab.org>
- Re: robot for circuit boards
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- RE: robot for circuit boards
- From: "Visser, Gerard" <gvisser@indiana.edu>
- robot for circuit boards
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Power updates to civil drawings (fwd from Yasky)
- From: Elton Smith <elton@jlab.org>
- Power updates to civil drawings
- From: Elton Smith <elton@jlab.org>
- ASIC Conference Call Minutes
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Tracking Preamp phone meeting etc
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Tracking Preamp phone meeting etc
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Preamp Pinout document 826-v1on portal
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Tracking Preamp phone meeting etc
- From: "John Schaapman" <jsch@phys.ualberta.ca>
- Re: Phone conference
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Phone conference
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Phone conference
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Tracking Preamp phone meeting proposal
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Tracking Preamp phone meeting proposal
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Tracking Preamp phone meeting proposal
- From: "John Schaapman" <jsch@phys.ualberta.ca>
- Tracking Preamp phone meeting proposal
- From: "John Schaapman" <jsch@phys.ualberta.ca>
- Re: Change of Shipping address
- From: James Pinfold <pinfold@phys.ualberta.ca>
- Re: Change of Shipping address
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Re: Change of Shipping address
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Change of Shipping address
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Re: first chips arriving
- From: "John Schaapman" <jsch@phys.ualberta.ca>
- Re: Change of Shipping address
- From: James Pinfold <pinfold@phys.ualberta.ca>
- Re: Change of Shipping address
- From: "John Schaapman" <jsch@phys.ualberta.ca>
- Re: Change of Shipping address
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Change of Shipping address
- From: Elton Smith <elton@jlab.org>
- Re: Change of Shipping address
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Open Package Quote for production
- From: Mitch Newcomer <mitch@hep.upenn.edu>
- Re: Open Package Quote for production
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- [Fwd: 77419 T74LAB In Fab (GAS-1)] (fwd)
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- first chips arriving
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Electronics Workshop Summary 28 Mar 2007
- From: "John Schaapman" <jsch@phys.ualberta.ca>
- Electronics Workshop Summary 28 Mar 2007
- From: "John Schaapman" <jsch@phys.ualberta.ca>
- Re: names of platforms
- From: Elton Smith <elton@jlab.org>
- names of platforms
- From: Elton Smith <elton@jlab.org>
- Fwd: Re: cockcroft waltob power supply (fwd from Paul Smith) (fwd)
- From: Elton Smith <elton@jlab.org>
- Re: Updated & Expanded Hall-D Detector Summary & Electronics
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Updated & Expanded Hall-D Detector Summary & Electronics
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Fw: Electronics Workshop Mar 28 Agenda List
- From: "Lars Holm" <lars@phys.ualberta.ca>
- RE: Electronics Workshop Mar 28 Agenda and Topics List
- From: "Lars Holm" <lars@phys.ualberta.ca>
- Re: Fw: Electronics Workshop Mar 28 Agenda and Topics List
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Re: Scalers and other electronics for Hall D
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Scalers and other electronics for Hall D
- From: Elton Smith <elton@jlab.org>
- Re: Die Pad Layout
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: Fw: Re: Collaboration meeting for GleX electronic
- From: Elton Smith <elton@jlab.org>
- GAS-1 ASIC submission and collaboration meeting (fwd)
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- Fw: Re: Collaboration meeting for GleX electronic
- From: "Lars Holm" <lars@phys.ualberta.ca>
- Hall Detector Systems Summary and Electronics
- From: "Fernando J. Barbosa" <barbosa@jlab.org>
- Re: GlueX collaboration meeting and electronics
- From: Elke-Caroline Aschenauer <elke@jlab.org>
- general signup to halld-electronics
- From: Elton Smith <elton@jlab.org>
- Initial message into halld-electronics list archive
- From: Paul Letta <letta@jlab.org>
Mail converted by MHonArc
2.4.6